SL2A - CD/DVD Labels 116mm

Subject to change without prior notice

Face Material

LSJ White Premium has a bright white, uncoated label paper with a very good opacity and a smooth finish, enabling good quality print results by both traditional pre-print processes Flexo / Litho and then overprinting using Ink-jet, Laser and Copier toner systems.

Adhesive

UK54 is a High Tack adhesive that performs well on a wide range of surfaces, including various boards. UK54 gives very good adhesion to low energy surfaces such as polythene, both at room temperature and under chill conditions. You hould always test the adhesive in the enviroment it will be used / applied. Suitable for use with Ink-Jet, laser and other variable information printable laminates, UK54 has excellent resistance to edge bleed to prevent contamination inside printers. Note: Not advised for labelling highly plasticised materials, eg: Flexible PVC.

Backing HSL

our backing paper is a bleached kraft with good flatness properties and dimentional stability. The laminate is for high speed, desktop Laser printers Copiers and Ink-Jet systems.

Laminate

Subject to change without prior notice

Face Material

UK LH White Premium has a bright white, uncoated label paper with a very good opacity and a smooth finish, offers optimal results and toner keying with all Xerographic print sytems, both Copier & Laser systems and Inkjet printers. When converting laminate intended for subsequent overprinting, we take great care to control the laminate moisture and curl, our product is produced with layflat built in. Failure to do so can lead to feed and print problems particularly in Laser and Copier systems. Care has also too be taken during our production and storage. We advise that self adhesive laminates should be fed from the printer manufacturer's recommended input tray which, for most printers, is usually a multipurpose feed tray sometimes refered to as the MP tray or manual bypass. Most printer manufactures recommend Short Edge Lead into the printer (Not Wide Edge) Grain needs

Adhesive

UK24N is a Removable Adhesive that performs well on a wide range of surfaces, including various boards. UK24N is suitable for applications requiring medium tack combined with good removability. It is particularly suited for labelling surfaces like cardboard, PE-Films and steel. Removability may be impaired if applied on certain surface coated materials. Adhesive UK24N features excellent resistance to light, heat and ageing. You should always test the adhesive in the enviroment it will be used / applied. Suitable for use with Ink-Jet, Laser Photocopier and other variable information printable laminates, UK24N has excellent resistance to edge bleed to prevent contamination inside printers.

Backing DTL

This coated kraft liner has been designed for production of label sheets for copiers and laser printers. The reverse of the paper assures excellent processing characteristics, i.e. high friction combined with high abrasion resistance.

Laminate

Subject to change without prior notice

Stocked Colours

Other colours are available made to order, get in contact for full information

Face Material

LSJ COLOUR TINTED a bright white, label paper with a very good opacity and a smooth finish, that we tint in a wide range of colours which will produce good quality print results by both traditional pre-print processes Flexo / Litho and then overprinting using Laser and Copier toner systems. Like most paper products our product is produced LONG GRAIN LSJ COLOUR TINTED is suitable for A4 sheet Labels, Computer sprocket punched fan-folded label sheets. When tinting the laminate intended for subsequent overprinting, we take great care to control the laminate moisture and curl, our product is produced with layflat built in. Failure to do so can lead to feed and print problems particularly in laser and copier systems. Care has also been taken during our storage and production. We advise that self adhesive laminates should be fed from the printer manufacturer's recommended input tray which, for desktop printers, is usually a multipurpose feed tray sometimes refered to as the MP tray. Most printer manufactures recommend Short Edge Lead into the printer (Not Wide Edge) Grain needs to be perendicular to the feed path of the rollers ( ie., pointing in the direction of rotation )

Adhesive

UK54 is a High Tack adhesive that performs well on a wide range of surfaces, including various boards. UK54 gives very good adhesion to low energy surfaces such as polythene, both at room temperature and under chill conditions. You hould always test the adhesive in the enviroment it will be used / applied. Suitable for use with Ink-Jet, laser and other variable information printable laminates, UK54 has excellent resistance to edge bleed to prevent contamination inside printers. Note: Not advised for labelling highly plasticised materials, eg: Flexible PVC.

Backing HSL

our backing paper is a bleached kraft with good flatness properties and dimentional stability. The laminate is for high speed, desktop Laser printers Copiers and Ink-Jet systems.

Laminate

Subject to change without prior notice

Stocked Colours

Other colours are available, get in contact for more information

Face Material

LSJ COLOUR TINTED a bright white, label paper with a very good opacity and a smooth finish, that we tint in a wide range of colours which will produce good quality print results by both traditional pre-print processes Flexo / Litho and then overprinting using Laser and Copier toner systems. Like most paper products our product is produced LONG GRAIN LSJ COLOUR TINTED is suitable for A4 sheet Labels, Computer sprocket punched fan-folded label sheets. When tinting the laminate intended for subsequent overprinting, we take great care to control the laminate moisture and curl, our product is produced with layflat built in. Failure to do so can lead to feed and print problems particularly in laser and copier systems. Care has also been taken during our storage and production. We advise that self adhesive laminates should be fed from the printer manufacturer's recommended input tray which, for desktop printers, is usually a multipurpose feed tray sometimes refered to as the MP tray. Most printer manufactures recommend Short Edge Lead into the printer (Not Wide Edge) Grain needs to be perendicular to the feed path of the rollers ( ie., pointing in the direction of rotation )

Adhesive

UK54 is a High Tack adhesive that performs well on a wide range of surfaces, including various boards. UK54 gives very good adhesion to low energy surfaces such as polythene, both at room temperature and under chill conditions. You hould always test the adhesive in the enviroment it will be used / applied. Suitable for use with Ink-Jet, laser and other variable information printable laminates, UK54 has excellent resistance to edge bleed to prevent contamination inside printers. Note: Not advised for labelling highly plasticised materials, eg: Flexible PVC.

Backing HSL

our backing paper is a bleached kraft with good flatness properties and dimentional stability. The laminate is for high speed, desktop Laser printers Copiers and Ink-Jet systems.

Laminate

Subject to change without prior notice

Stocked Colours

Face Material

LSJ COLOUR TINTED a bright white, label paper with a very good opacity and a smooth finish, that we tint in a wide range of colours which will produce good quality print results by both traditional pre-print processes Flexo / Litho and then overprinting using Laser and Copier toner systems. Like most paper products our product is produced LONG GRAIN LSJ COLOUR TINTED is suitable for A4 sheet Labels, Computer sprocket punched fan-folded label sheets. When tinting the laminate intended for subsequent overprinting, we take great care to control the laminate moisture and curl, our product is produced with layflat built in. Failure to do so can lead to feed and print problems particularly in laser and copier systems. Care has also been taken during our storage and production. We advise that self adhesive laminates should be fed from the printer manufacturer's recommended input tray which, for desktop printers, is usually a multipurpose feed tray sometimes refered to as the MP tray. Most printer manufactures recommend Short Edge Lead into the printer (Not Wide Edge) Grain needs to be perendicular to the feed path of the rollers ( ie., pointing in the direction of rotation )

Adhesive

UK54 is a High Tack adhesive that performs well on a wide range of surfaces, including various boards. UK54 gives very good adhesion to low energy surfaces such as polythene, both at room temperature and under chill conditions. You hould always test the adhesive in the enviroment it will be used / applied. Suitable for use with Ink-Jet, laser and other variable information printable laminates, UK54 has excellent resistance to edge bleed to prevent contamination inside printers. Note: Not advised for labelling highly plasticised materials, eg: Flexible PVC.

Backing HSL

our backing paper is a bleached kraft with good flatness properties and dimentional stability. The laminate is for high speed, desktop Laser printers Copiers and Ink-Jet systems.

Laminate

This spec sheet is available upon request. Please call us on 0845 450 1580 or email us at sales@labels-direct.co.uk for more information.

Subject to change without prior notice

Face Material

Laser D Premium White - A surface sized white label paper with good opacity and a smooth finish, offers optimal results and toner keying with most Xerographic printing sytems, both Copier & Laser systems and also a great number of Inkjet printers. Like most paper products our product is produced with LONG GRAIN Laser D Premium White is suitable for A5, A4 & A3 sheets Fan Fold and Roll Label products When pre-printing the laminate intended for subsequent overprinting, we take great care to control the laminate moisture and curl, our product is produced with layflat built in. Failure to do this can lead to feed and print problems particularly in Laser and Copier systems. Great care has also been taken during the production and then storage. We advise that self adhesive laminates should be fed from the printer manufacturer's recommended input tray which, for most printers, is usually a multipurpose feed tray sometimes refered to as the MP tray or Manual Bypass. Most printer manufactures recommend Short Edge Lead into the printer (Not Wide Edge) Grain needs to be Parallel to the feed path of the rollers ( ie., pointing in the same direction as the roller rotation )

Adhesive

DRP480 Deep Freeze is a Modified Deep Freeze Adhesive that performs well on a wide range of surfaces, including some plastics metals and various cardboard even with rough surfaces. DRP480 gives good adhesion to rough surfaces, but not for extremley curved surfaces, It can be be applied to Pre Frozen Products down to 20 ºC it has a Deep Freeze (long term) to - 40 ºC. But you should always test the adhesive in the enviroment it will be used / applied. Suitable for Laser Copier Ink-Jet, and other Variable Information Printers. Because of the softness of the adhesive and the coat weight required to achieve a High Level of Adhesion with this product we generally, Matrix Strip the Edges, ( Window Trim). Using our DRY EDGE TECHNOLOGY System.

Backing HSL

our backing paper is a bleached kraft with good flatness properties and dimentional stability. The laminate is for high speed, desktop Laser printers Copiers and Ink-Jet systems.

Laminate

Subject to change without prior notice

Face Material

UK Laser Megatac R has a bright white, uncoated label paper with a very good opacity and a smooth finish, offers optimal results and toner keying with all Xerographic printing sytems, both Copier & Laser systems and Inkjet printers. This product is designed fr Laser / inkjet printed labels require adhesion to a number of difficult and apolar surfaces Like most paper products our product is produced with LONG GRAIN UK Laser Megatac R is suitable for A5, A4 & A3 sheets, When converting laminate intended for subsequent overprinting, we take great care to control the laminate moisture and curl, our product is produced with layflat built in. Failure to do so can lead to feed and print problems particularly in Laser and Copier systems. Care should also to be taken during our production and storage. We advise that self adhesive laminates should be fed from the printer manufacturer's recommended input tray which, for most printers, is usually a multipurpose feed tray sometimes refered to as the MP tray or manual bypass. Most printer manufactures recommend Short Edge Lead into the printer (Not Wide Edge) Grain needs to be perpendicular to the feed path of the rollers ( ie., pointing in the same direction as the roller rotation )

Adhesive

UKPerm A4M is a High tack extra permanent adhesive specifically dformulated for adhesion to a range of difficult substrates such as a corrugated board and apolar plastic surfaces . UKPerm A4M gives superb intital tack / bond and long term adhesion even at low temperatures . Sheets converted for Laser, Copier and Inkjet Printing should always feature our UK DRY EDGE TECHNOLOGY

Backing HSL

our backing paper is a bleached kraft with good flatness properties and dimentional stability. The laminate is for high speed, desktop Laser printers Copiers and Ink-Jet systems.

Laminate

This spec sheet is available upon request. Please call us on 0845 450 1580 or email us at sales@labels-direct.co.uk for more information.

This spec sheet is available upon request. Please call us on 0845 450 1580 or email us at sales@labels-direct.co.uk for more information.

This spec sheet is available upon request. Please call us on 0845 450 1580 or email us at sales@labels-direct.co.uk for more information.

This spec sheet is available upon request. Please call us on 0845 450 1580 or email us at sales@labels-direct.co.uk for more information.

Subject to change without prior notice

Face Material

POLYPRINT R A matt white high pigmented computer imprintable polyethylene film POLYPRINT R is suitable for a wide range of Label products, Roll or Sheets (A5, A4 & A3) This product is suitable for printing through most laser / copier systems, mono & colour. It can also be used though thermal transfer systems with the suitable ribbon grade, dot matrix printed, Lithographic, Letterpress Silk Screen or Gravure giving excellent resultsin water based, solvent & UV Inks.Inks suitable for filmic substrates are recommended. Our product is produced with LONG GRAIN A curl may be evident on exiting the printer but will flatten quickly. *We advise that self adhesive laminates should be fed from the printer manufacturer's recommended input tray. For most printers this is usually a multipurpose feed tray or manual bypass tray ( Not the Cassette or Draw ) . Most printer manufacturers recommend short edge lead into the printer (not wide edge). Grain should be parallel to the feed path of the rollers, i.e pointing in the same direction as roller rotation )

Adhesive

R37 permanent is a clear permanent adhesive featuring excellent initial tack, even on rough or apolar surfaces. Gives a very high-level of ultimate adhesion even on HDPE, Improved temperature water, solvent & general chemical resistance and is ideal for many industrial applications.

Backing KSS100

our backing paper is a bleached kraft specially re humidified and stabilised to stay flat at all times during use.

Laminate

THIS PRODUCTS MEETS THE REQUIREMENTS OF BS5609 PART II : MARINE USE

Subject to change without prior notice

Face Material

POLYLASER R Matt White A Matt White Polyester Film with an added ink toner receptive coating POLYLASER R Matt White is suitable for a wide range of Label products, Roll or Sheets (A5, A4 & A3) This product is suitable for printing through most laser / copier systems, mono & colour. It can also be used though thermal transfer systems with the suitable ribbon grade, dot matrix printed, Lithographic, Letterpress Silk Screen or Gravure giving excellent results with water based, solvent & UV cured Inks. Our product is produced with LONG GRAIN a curl may be evident on exiting the printer but should flatten quickly. We advise that self adhesive laminates should be fed from the printer manufacturer's recommended input tray. For most printers this is usually a multipurpose feed tray or manual bypass tray ( Not the Cassette or Draw ). Most printer manufacturers recommend short edge lead into the printer (not wide edge). Grain should be parallel to the feed path of the rollers, i.e pointing in the same direction as roller rotation )

Adhesive

R37 permanent is a clear permanent adhesive featuring excellent initial tack, even on rough or apolar surfaces. Gives a very high-level of ultimate adhesion even on HDPE, Improved temperature water, solvent & general chemical resistance and is ideal for many industrial applications.

Backing KSS100

our backing paper is a bleached kraft specially re humidified and stabilised to stay flat at all times during use.

Laminate

THIS PRODUCTS MEETS THE REQUIREMENTS OF BS5609 PART II : MARINE USE

This spec sheet is available upon request. Please call us on 0845 450 1580 or email us at sales@labels-direct.co.uk for more information.

Subject to change without prior notice

Face Material

POLYLASER R Matt Translucent a Matt translucent Polyester Film with an added ink toner receptive coating POLYLASER R Matt Translucent is suitable for a wide range of Label products, Roll or Sheets (A5, A4 & A3) This product is suitable for printing through most laser / copier systems, mono & colour. It can also be used though thermal transfer systems with the suitable ribbon grade, dot matrix printed, Lithographic, Letterpress Silk Screen or Gravure giving excellent results with water based, solvent & UV cured Inks. Our product is produced with LONG GRAIN A curl may be evident on exiting the printer but will flatten quickly. We advise that self adhesive laminates should be fed from the printer manufacturer's recommended input tray. For most printers this is usually a multipurpose feed tray or manual bypass tray. Most printer manufacturers recommend short edge lead into the printer (not wide edge). Grain should be parallel to the feed path of the rollers, i.e pointing in the same direction as roller rotation )

Adhesive

R37 permanent is a clear permanent adhesive featuring excellent initial tack, even on rough or apolar surfaces. Gives a very high-level of ultimate adhesion even on HDPE, Improved temperature water, solvent & general chemical resistance and is ideal for many industrial applications.

Backing KSS100

our backing paper is a bleached kraft specially re humidified and stabilised to stay flat at all times during use.

Laminate

THIS PRODUCTS MEETS THE REQUIREMENTS OF BS5609 PART II : MARINE USE

Subject to change without prior notice

Face Material

Polylaser Matt Silver F PET Laser PET is Specifically designed for " Hot Fuse " Digital sheet fed systems and Laserr conbtinuous printing systems gives optimal flatnes, some post print curl can be seen on exit of printer, however flatness should return quickly Like most paper products our product is produced with LONG GRAIN is suitable for A5, A4 & A3 sheets, When converting laminate intended for subsequent overprinting, we take great care to control the laminate moisture and curl, our product is produced with layflat built in. Failure to do so can lead to feed and print problems particularly in Laser and Copier systems. Care has also too be taken during our production and storage. We advise that self adhesive laminates should be fed from the printer manufacturer's recommended input tray which, for most printers, is usually a multipurpose feed tray sometimes refered to as the MP tray or manual bypass. Most printer manufactures recommend Short Edge Lead into the printer (Not Wide Edge) Grain needs to be perendicular to the feed path of the rollers ( ie., pointing in the same direction as the roller rotation )

Adhesive

UK296 Permanent UK296 is a Clear Permanent Adhesive that performs well on a wide range of surfaces, including various boards. UK296 gives good adhesion to rough surfaces, but not for extremley curved surfaces, both at room temperature and under some chill conditions, it also has good freezing characteristics with very good ageing properties. You should always test the adhesive perfomance in the environment it will be used / an to be then applied. Suitable for use with Laser Photocopier and other variable information printable laminates, Because of the softness of the adhesive and the coat weight required to achieve a High Level of Adhesion with this product we generally, Matrix Strip the Edges, ( Window Trim). Using our DRY EDGE TECHNOLOGY System.

Backing HSL

our backing paper is a bleached kraft with good flatness properties and dimentional stability. The laminate is for Desktop Laser Printers, Photo Copiers NOT Ink-Jet Systems.

Laminate

This spec sheet is available upon request. Please call us on 0845 450 1580 or email us at sales@labels-direct.co.uk for more information.

This spec sheet is available upon request. Please call us on 0845 450 1580 or email us at sales@labels-direct.co.uk for more information.

This spec sheet is available upon request. Please call us on 0845 450 1580 or email us at sales@labels-direct.co.uk for more information.